MST Construction equipment division for Devon Somerset and West Dorset, UK

In April 2006 MST were appointed as Kubota Construction Equipment Dealers for Devon, Somerset and West Dorset. Having supplied Kubota Ground Care machinery in Devon for many years, MST were delighted to be chosen to handle the market leading range of Kubota Mini Excavators. A Construction Equipment Division has been formed, based at MST’s head office depot at Tiverton, and headed up by long term Kubota Sales Manager, Colin Ladd and a specialist Sales Representative David Blackford. On the following pages you will find details of the Kubota Construction Products, together with a selection of additional construction related plant and machinery. There are also details of our used equipment and a contact page for your use.

Kubota tracked mini excavators are universally known and respected for their reliability, durability and appetite for hard work. Designed and built to produce cost-effective results time after time, Kubota mini excavators continue to extend their reputation within industries ranging from civil engineering to plant hire, utilities to landscaping and house building to grounds maintenance.

Kubota's KX Series range of mini excavators has not stood still since its introduction within the UK and Ireland more than 10 years ago. Continued model development and growth has seen the KX Series expand into a formidable line-up of machines capable of handling the toughest of tasks on the most difficult of terrains.

All powered by Kubota's unique E- TVCS multi-cylinder diesel engines, KX Series mini excavators are quiet and economical with very low exhaust emissions, making them particularly suited for work in sensitive locations. Advanced hydraulic systems improve response and reduce energy wastage, giving the KX Series the ability to outperform larger and more costly machines, enhanced by the ergonomically-designed control lever layout for smoother operation with reduced driver fatigue. For more information, or a chat to our specialist staff, use our contact page

Since the development of its first mini excavator in 1974, Kubota has been extending the limits of design and technology in the production of equipment incorporating optimum economy, environmental awareness, ease of operation and functionality.

The latest fruits of these labours can be found within the innovative U Series zero tail-swing mini excavators from Kubota. Incorporating even greater operator comfort and environmental efficiency with unmatched 360-degree manoeuvrability, the new U Series represents the most extensive line-up of sub 5-tonne zero tail-swing machines currently available on the market. Check out the five-strong Kubota model line-up and see how it has been designed from the ground up to meet today's construction industry needs and satisfy all of your operational requirements with optimum comfort and safety. Having compared the machines' attributes in words and pictures, you can easily request more information or a demonstration via our Contact page.

Diga-Bara is a new concept in material handling, primarily designed for mini excavators, enabling a single operator to be more productive, by virtue of allowing continuity of work without leaving the operator's cabin.

Extremely strong in design, Diga-Bara is capable of tackling the toughest jobs, yet is lightweight in it's construction for ease of use and transportation. eg pick-up truck/small trailer. Diga-Bara's tipping mechanism can be operated by simply releasing the locking catch using the excavator's bucket, or the operator may take out small amounts as required. eg concrete, pipe bedding etc. by simply scooping out with the excavator bucket. Diga-Bara is virtually maintenance free and most serviceable parts can be obtained from your local agricultural or plant dealer/tyre service. Diga-Bara unlike regular site dumpers, has no engine transmission/drive axles, hence due to its light construction Diga-Bara has a very low ground contact pressure. We normally hold Diga-Bara units in stock – use our contact page for more details or to arrange a demo

With the increased usage of mini excavators there is a requirement to move excavated material with both walk behind and small ride-on tracked dumpers. These are ideally partnered with a mini excavator particularly where restricted site access is a problem. The WB05 models have Mitsubishi air-cooled petrol engines, the WBOTs utilise a Yanmar air-cooled diesel and all other models have liquid cooled Kubota diesel engines

For the extremes in weather and site conditions nothing can compete with a tracked dumper with its go anywhere ability and low ground bearing pressure. Morooka is a market leader in the design, manufacture and sales of large tracked dumpers. All models have rear discharge but the MST300VD is available with the option of a three way tipping body

HONDA TRACKED LOAD CARRIER

The Honda tracked Load carrier has a unique tread pattern which offers superb traction across varied terrain, gradient or even steps, the low ground pressure leads to minimal damage. The hydraulic scissor lift gives a smooth, controllable, high tip up to 1220mm. The skip is manufactured from robust steel, only 680mm wide and fits through a standard door frame. A hydrostatic drive provides a smooth forward and reverse operation, and a dead mans handle provides security. The load carrier is powered by a Honda OHV 5.5HP 4 stroke petrol engineFor a demonstration, prices or more information use our contactpage

A complete range designed to achieve the highest customer satisfaction

Comprising models XAS 37 and XAS 47 with Kubota engines and XAHS 37, XAS 47, XAS 57, XA(T)S 67, XAS 77, and XAS 97 with Deutz engines, Atlas Copco Series 7 are an innovative range of single axle, oil injected rotary screw compressors. Powered by the Kubota 0905 and 01105 3-cylinder engine or the Oeutz 2011 2- or 3-cylinder engine, Series 7 will provide a reliable source of compressed air to drive pneumatic tools including chipping and jackhammers, nut-runners, grinders and rammers. High free air delivery applications such as sandblasting are also covered. An optional integral 6.5 or 12 kVA generator can be specified to prove additional power for welding, lighting, heating, site instruments and power tools.

Atlas Copco - the world leader in portable air compressors One in three compressors sold throughout the World is manufactured by Atlas Copco. Produced in the World's largest dedicated compressor manufacturing plant, Atlas Copco’s advanced research and development and proven products ensure the best solution for all your compressed air needs.For further details , or a demonstration, use our contact page

Crush concrete and cut costs with a BAVTRAK Micro Crusher
Why recycle concrete? If you can save on waste and tipping costs, and also on bought-in hardcore, by recycling on site, the benefits are considerable. Add to this the gradual trend for higher taxes on quarried aggregates and landfill waste, as well as increasing fuel costs and traffic congestion, and the advantages are clear to see

Narrow access and manouverable
Only 720mm wide, weighs just 760kg
Electric start, 12 volt system
Engine Mitsubishi GM 182 L

Why buy a micro crusher?Modern building sites are becoming ever more compact, with land prices and planning issues dictating more properties are built per acre. Many modern 'detached' houses are in fact barely broken terraces with minimal access to small driveways, and tighty proportioned back gardens. When you need to deal with waste concrete, whilst also keeping property owners with their neighbours happy, the BAVTRAK excels. It is possible to maximise output whilst minimising mess and vehicle movements, with a reduction in on/off site traffic. The BAVTRAK will keep quietly working ensuring your work rates are on schedule.For further details on Bavtrak micro crushers, or to arrange an on site demonstration, use our contact page

Dynapac Concrete Equipment
DYNAPAC is the founder of vibration technology.

The pendulum principle which made it possible to manufacture high-frequency poker vibrators was invented by Dynapac some 50 years ago. With constant developments in concrete equipment technology, DYNAPAC is one of the leading suppliers to the construction industry worldwide.

POKER VIBRATORS

Electronic - 5 Models 25 – 65mm tube diameter
Electric – uses standard wall socket, AN & AX Series
Tube diameter from 25 – 90mm
Pendulum pokers – wide choice of drive units
Pneumatic Pokers – diameters from 26 – 155mm
Power vibrators with flexible shaft

VACUUM TREATMENTS

The Dynapac vacuum treatment is a mechanical compaction technique reducing water and air contained in the concrete and enabling larger aggregates to move upwards and set in the concrete surface. Using a BA40 vacuum pump and connected BB suction mats allows cement use with higher water content leading to easier pouring while still obtaining a strong concrete. Troweling can start immediately after the suction mats have been removed

POWER TROWELS

Single hand guided power trowels, petrol version available in five models with Honda engines and rotor diameters from 600 – 1140mm

Single hand guided power trowels are also available with electric power. Three models, rotor diameter 600mm, 830mm and 1020mm

There are also two models of ride on double trowels, working widths 1780mm and 2000mm

CONCRETE GRINDERS AND CUTTERS

Dynapac floor concrete saws form a compact range covering the most common cutting applications.All floor saws feature:

Constant water cooling of the diamond disk on both sides

Honda engine with cyclonic filter

Optimum balance for accurate cutting

A diesel version

Dynapac compaction equipment offers planers and a full range of pavers, vibratory rollers and static rollers, trench rollers and duplex rollers, vibratory plates, rammers and concrete equipment or all types. They basically cover the entire compaction and paving field from top to bottom with the customers needs in mind. At MST we focus on only a few of the main divisions from Dynapac, particularly asphalt rollers, plate compactors, tampers and Dynapac rollers, for information on these or any other Dynapac products, please use our contact page.

Tandem RollersDynapac's double drum asphalt roller range features everything from the most compact equipment for repair jobs to large machines for the biggest sites. Vibration dampened platforms, swivel seats for better visibility, logically sorted controls and Roll Over Protective Structures (ROPS) all contribute to the manoeuvrability, operator ergonomics and safety.

Combi RollersThe combi versions are equipped with four rubber tyres at the rear instead of a drum. The rubber wheels are driven in pairs by separate propulsion motors, thus minimising the risk of damaging newly laid asphalt compound when making sharp turns. The rubber wheels ensure a denser and smoother surface on the asphalt, a feature that is sometimes required.

Jumping Jack Hammers - best suited for loose or cohesive soils in a limited area, a ramming shoe alternately strikes and leaves the surface at high speed and compacts the soil. Rammers or tampers as they are called are used for wide range of construction activities.

Plate compactors I soil compactors - used for small repair and maintenance work, Plate tampers use centrifugal force for compacting materials. They are ideal for compaction of granular soils, sands, gravel, crushed aggregate and mixed soils in enclosed areas. They are hand operated and come in two types - one-way plate and forward I reverse plate where forward I reverse operation is required. Reverse vibratory plates are ideal for backfilling along foundations and utility

MST are agents for the Indespension range of industrial, goods and plant trailers, designed and manufactured for the professional user. Standard features on the Indespension Trailer range include a fully galvanised finish, integral lashing points, load bearing mudguards, inset lighting clusters, triple lock security coupling heads, phenolic floors, indespension suspension, chequer plate construction and free after sales check. In addition MST can provide a full service and parts back up. Indespension Plant Trailers are always in stock – use our contact page for a quotation or to arrange a demonstration

CONTACT US

Construction Equipment Sales Manager	Colin Ladd Tel. Office 01884 244030 Tel. Mobile 07721 985106 Emailcolinl@mst-pis.co.uk
Construction Equipment Sales Representative	David Blackford Tel. Office 01884 254444 Tel. Mobile 07738 885056 Email constructionequip@mst-pis.co.uk
Sales Office Manager	Sue Westlake Tel. Office 01884 254444 Email suew@mst-pis.co.uk
Parts Department	Simon Hemingway Tel. Office 01884 244039 Fax 01884 258142 Out of hours 07721 985090

Stock No	Description	Make	Year	Price (exc VAT)
41012653	K008-3 (850kg) MINI DIGGER, c/w 3 BUCKETS	KUBOTA	2005	£9000.00
41013654	DIGA BARA 1400mm MATERIAL HANDLER, AS NEW	DIGA BARA		£750.00
41014027	K008-3 (850kg) MINI DIGGER, 900 HOURS	KUBOTA	2004	£7250.00
41014209	U10-3 (1 TONNE) MINI DIGGER, 900 HOURS c/c 1 BUCKET	KUBOTA	2004	£6995.00
41014536	KX61-3 (2.5 TONNE) DIGGER, EX DEMO 18 HOURS c/c 3 NEW BUCKETS	KUBOTA	2006	£16250.00
41014742	KX121-2 (3.75 TONNE) DIGGER c/w 4 BUCKETS	KUBOTA	2000	£7250.00
41014900	POWER FAB 125 GRAVE DIGGING MACHINE c/w 3 BUCKETS	POWER FAB		POA